| View previous topic :: View next topic |
| Author |
Message |
danamulder42
Guest
|
 Posted: Thu Apr 25, 2002 3:58 am Post subject: Gamepad in MagicEngine |
 |
|
Hi, I just got MagicEngine and am having problems with using my gamepad. I know it's configured correctly through Windows Control Panel. MagicEngine even detects the thing, its in the log file and in the program itself as gamepad 1, but when I go to use it nothing happens...Ive looked for some documentation on it but havent been able to find much...I feel like Im close though if its being detected? Does anyone have any ideas? Thanks in advance for your help.
~Rach |
|
| Back to top |
|
 |
Ozzy_98
Member
Joined: 27 Apr 2002
Posts: 61
Location: Ohio, USA
|
| Posted: Sat Apr 27, 2002 4:37 am Post subject: |
|
|
| Did you configure the pad first? when you first get the emu, the gamepad isn't set to any controlls. Just go into config and that should fix it. |
|
| Back to top |
|
|
danamulder42
Guest
|
| Posted: Sat Apr 27, 2002 2:19 pm Post subject: |
|
|
Hi, thanks for your reply! I actually did *try* to configure it, but MagicEngine wasn't picking up the controls properly...I fiddled around with it for awhile though and got it to work--don't really know what I did different. Thanks again though!  |
|
| Back to top |
|
|
Ozzy_98
Member
Joined: 27 Apr 2002
Posts: 61
Location: Ohio, USA
|
| Posted: Sun Apr 28, 2002 5:43 am Post subject: |
|
|
| You like have to pick the controll spot, then hit enter, then press the button. Some reason some people mess it up. Not sure how, but on dalnet I've helped a few people do this. |
|
| Back to top |
|
|
danamulder42
Guest
|
| Posted: Sun Apr 28, 2002 2:50 pm Post subject: |
|
|
| Hey, yeah, I did figure that much out before, that wasnt really my problem. I just tried changing some settings on the controller itself and it worked, thanks again though. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
