| View previous topic :: View next topic |
| Author |
Message |
DaveTheMan
Visitor
Joined: 19 Apr 2012
Posts: 10
|
 Posted: Thu Apr 19, 2012 9:54 am Post subject: Using Daemon Tools with Emulator |
 |
|
It use DVD Drive I and does not get picked up by Emulator.
So how Do I fix this problem so I can use Daemon Tools?
_________________
I am Da Man |
|
| Back to top |
|
 |
Jabberwok
Elder
Joined: 24 Apr 2002
Posts: 532
Location: Quebec, Canada
|
| Posted: Fri Apr 20, 2012 12:36 am Post subject: |
|
|
Your best bet is to ask on the daemon tools forums about their software I think. Also, I'd read their FAQ for details.
Hope this helps!
_________________
If you translate Pole Position in French with babelfish you get 'Position de Polonais'... I think it's hilarious... from a French point of view. |
|
| Back to top |
|
|
DaveTheMan
Visitor
Joined: 19 Apr 2012
Posts: 10
|
| Posted: Sun Apr 22, 2012 6:39 am Post subject: |
|
|
| Jabberwok wrote: | Your best bet is to ask on the daemon tools forums about their software I think. Also, I'd read their FAQ for details.
Hope this helps! |
Guess that Would but can you also Change the Drive Letter that this Emulator looks at for CD Drive?
_________________
I am Da Man |
|
| Back to top |
|
|
Jabberwok
Elder
Joined: 24 Apr 2002
Posts: 532
Location: Quebec, Canada
|
| Posted: Wed Apr 25, 2012 2:17 pm Post subject: |
|
|
Look inside your PCE.INI (located inside your Magic Engine folder) and go to the cd-rom settings section. Once there the rest is pretty self-explainatory. Depending on your OS you will have to specify a drive letter or not.
_________________
If you translate Pole Position in French with babelfish you get 'Position de Polonais'... I think it's hilarious... from a French point of view. |
|
| Back to top |
|
|
DaveTheMan
Visitor
Joined: 19 Apr 2012
Posts: 10
|
| Posted: Sun Apr 29, 2012 4:53 am Post subject: |
|
|
| Jabberwok wrote: | | Look inside your PCE.INI (located inside your Magic Engine folder) and go to the cd-rom settings section. Once there the rest is pretty self-explainatory. Depending on your OS you will have to specify a drive letter or not. |
I have added the Drive letter but still did not pick it up. Do I have to do something else?
_________________
I am Da Man |
|
| Back to top |
|
|
DaveTheMan
Visitor
Joined: 19 Apr 2012
Posts: 10
|
| Posted: Tue Jun 12, 2012 4:25 am Post subject: |
|
|
Here is my Log File:
| Quote: | [path]screenshots="screenshots"
[path]saved_games="states"
[path]sram="sram"
[video]screen_width=800
[video]screen_height=600
[video]screen_depth=32
[video]windowed=
[setup]show=
[video]driver=
[gamepad]config=
[keyboard]config=
[misc]language=
[VIDEO INIT]
driver... DirectX
found 1 video adapter(s)
- adapter 1 has 2 device(s) and 42 video mode(s)
select adapter... 1
select device... 1
build video mode list... 42 modes
device: v0.0.0 (HAL)
[INPUT INIT]
opening direct input DLL... OK
init direct input... OK
scanning gamepad device(s)...
- no gamepad
[SOUND INIT]
scanning sound card... found 3 sound card(s)
checking sound card mixer ("Speakers (Realtek High Definiti" v6.1)... OK
+SPEAKERS: vol = 100 [00000000/0000FFFF]
-COMPACTDISC [ 0] vol = 100 [00000000/0000FFFF] (selected as CD input line)
-WAVEOUT [ 1] vol = 100 [00000000/0000FFFF]
master audio volume... 100 (100)
wav audio volume... 100 (100)
cd audio volume... 100 (100)
opening direct sound DLL... OK
init direct sound... OK
set cooperative level... OK
create primary buffer... OK
setup primary buffer: freq=44100 channels=2 bits=16... OK
create thread... OK
[CD-ROM INIT]
scanning drives...
+ drive D: ATAPI iHAS324 B (port=2, unit=0) [CDROM]
+ drive I: GRIXWF O5EVSPEF (port=5, unit=1) [CDROM]
+ drive M: VYPOTGL VKDA7GLQ7WL (port=4, unit=0) [CDROM]
+ drive N: GRIXWF O5EVSPEF (port=5, unit=0) [CDROM]
opening ASPI DLL... could not open the DLL!
found 0 CD-ROM drive(s)
[CDDA INIT]
creating thread... OK
[CD SCAN INIT]
creating thread... OK
[GAMEPAD INIT]
auto calibration: -500 500
[PSG INIT]
allocating sound buffers(6)... OK
allocating ADPCM sound buffer [0]... OK
allocating ADPCM sound buffer [1]... OK |
Does that help?
_________________
I am Da Man |
|
| Back to top |
|
|
kaiyara
Visitor
Joined: 15 Jun 2013
Posts: 1
|
| Posted: Sat Jun 15, 2013 10:28 am Post subject: |
|
|
When I load a game I can only see the intro screen.I can not see a menu screen that will let me select and start the game.After intro screen I get a blank gray/ black screen and can only hear sound.The games have a cue and bin file, is this the correct format for the emulator?I load the cue file but it seems that it is the only file being accessed, not the bin file.What am I doing wrong.
http://www.prep4sure.com/
Last edited by kaiyara on Tue Jan 19, 2016 12:56 pm; edited 2 times in total |
|
| Back to top |
|
|
RegalSin
Member
Joined: 18 Dec 2012
Posts: 31
|
| Posted: Sun Sep 22, 2013 7:46 pm Post subject: |
|
|
I use Daemon Tools from time to time. It depends on which version of the emulator and does it supports multiple drives. With later versions of Magic Engine, the emulator does support mulitple drives, but have problems with reading directories. Earlier, versions only support one drive.
Another problem I ran into is, how some games do not read no matter what via Daemon tools. Try writing the game to an disc to see if it will pick up. The
speed of DT vs the emulator gives many issues.
The same could said about ePSXe or even Gens2 |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
