MagicEngine

[tally]

I am using Magic Engine version 0.99 - I was getting a error NO ACPI Drivers - I installed the adaptic drivers.

Now I get a No Cd Error - this is what my .INI file looks like and the drive I am trying to have it read is the D: Drive - doesn't seem to be looking for anything at all. What am I doing wrong?

# ----
# CD-ROM settings
# ----

[cdrom]

;
; CD-ROM drive
; --
; 0 -> first CD-ROM drive [default]
; 1 -> second CD-ROM drive
; ...
;

drive=

;
; SCSI driver timeout
; --
; change the delay that the emulator waits when accessing
; the CD-ROM SCSI driver, 0 is infinite delay
;

timeout=0

;
; CD-ROM cache
; --
; y -> enable
; n -> disable [default]
;

cache=n

;
; CD-ROM cache size
; --
; in KB [default is 512KB]
;

cache_size=512


# ----
# path settings
# ----

[OnImpulse]

I installed the ASPI drivers and the following is what I get...

It seems to be looking at my Hard Drive "it says the following - drive #: IC25N030 ATCS04-0 (port=0, unit=0) [HD]: ...what can I do...thanks in advanced...


[VIDEO INIT]
driver... DirectX
device: Intel(R) 830M Graphics Controller-0 v13.1.2992 (HAL)

[INPUT INIT]
opening direct input DLL... OK
init direct input... OK
scanning gamepad device(s)...
- no gamepad

[SOUND INIT]
scanning sound card... found 1 sound card(s)
checking sound card mixer ("YAMAHA AC-XG WDM Audio" v5.10)... OK
+SPEAKERS: vol = 100 [00000000/0000FFFF]
-WAVEOUT [ 0] vol = 100 [00000000/0000FFFF]
-SYNTHESIZER [ 1] vol = 100 [00000000/0000FFFF]
-UNDEFINED [ 2] vol = 74 [00000000/0000FFFF]
-COMPACTDISC [ 3] vol = 100 [00000000/0000FFFF] (selected as CD input line)
-MICROPHONE [ 4] vol = 84 [00000000/0000FFFF]
-TELEPHONE [ 5] vol = 82 [00000000/0000FFFF]
-ANALOG [ 6] vol = 48 [00000000/0000FFFF]
-ANALOG [ 7]
-ANALOG [ 8]
+WAVEIN:
master audio volume... 100 (100)
wav audio volume... 100 (100)
cd audio volume... 100 (100)
opening direct sound DLL... OK
init direct sound... OK
set cooperative level... OK
create primary buffer... OK
setup primary buffer: freq=44100 channels=2 bits=16... OK
create thread... OK

[CD-ROM INIT]
opening ASPI DLL... OK
scanning drives...
- drive #: IC25N030 ATCS04-0 (port=0, unit=0) [HD]
no CD-ROM drive

[GAMEPAD INIT]
auto calibration: -500 500

[BACKUP RAM INIT]
loading backup RAM database index file : "C:\Documents and Settings\John Murphy\Desktop\Magic10\backup.idx"... file not found!

[PSG INIT]
allocating sound buffers(6)... OK
allocating ADPCM sound buffer... OK

[HUCARD]
create dummy rom... OK
initialize a new backup RAM bank

Can anyone help me...