Fredo Visitor

Joined: 30 Oct 2012 Posts: 1
|
Posted: Tue Oct 30, 2012 12:17 pm Post subject: Probleme reconnaissance lecteur virtuel avec Daemon Tools |
|
|
Bonjour,
L'émulateur ne reconnait pas mon lecteur virtuel. J'utilise daemon tools lite.
J'ai suivi votre tuto. Je pense que ça bloque au niveau des chiffres, lettres à entrer dans le fichier config
Je suis sous Windows 7.
Voici la config de mes lecteurs:
Normalement que dois je entrer comme chiffres à "CD-Rom drive" et comme lettres à "CD-Rom drive letter ?
Quote: | # ----
# CD-ROM settings
# ----
[cdrom]
;
; CD-ROM drive
; --
; 0 -> first CD-ROM drive [default]
; 1 -> second CD-ROM drive
; ...
;
drive=
;
; CD-ROM drive letter
; --
; (Windows 2000/XP only)
;
; D:
; E:
; ...
;
|
Merci. |
|
Rockman Regular

Joined: 23 Jun 2004 Posts: 155
|
Posted: Thu Nov 01, 2012 7:57 pm Post subject: |
|
|
I'm sorry I don't speak French but I'll try to help anyway.
Look in log.txt for the [CD-ROM INIT] section. It'll look something like this:
Code: |
[CD-ROM INIT]
scanning drives...
+ drive E: ZEXALK TMROHYR (port=1, unit=0) [CDROM]
opening ASPI DLL... could not open the DLL!
found 1 CD-ROM drive(s)
|
If both of your drives are listed then the problem is probably with daemon tools or your disc image (e.g. bad cue sheet). In windows (xp, 7) a PC-Engine disc usually shows up as an audio CD.
I hope this helps!
MACHINE TRANSLATION:
Je suis désolé je ne parle pas français, mais je vais essayer d'aider de toute façon.
Dans log.txt, recherchez la section [INIT CD-ROM]. Il va ressembler à ceci:
Code: |
[CD-ROM INIT]
scanning drives...
+ drive E: ZEXALK TMROHYR (port=1, unit=0) [CDROM]
opening ASPI DLL... could not open the DLL!
found 1 CD-ROM drive(s)
|
Si deux de vos lecteurs n'apparaissent alors le problème est probablement avec daemon tools ou votre image disque (p. ex. mauvais cue sheet). Sous windows (xp, 7), qu'un disque de PC-Engine se présente généralement comme un CD audio.
J'espère que cela aide!  |
|